The Decimator G String noise reduction pedal was designed for those who want the ultimate performance in a foot pedal and delivers performance like that of the renowned ISP Decimator ProRackG.

The Decimator G String provides a totally independent channel of Decimator noise reduction that can be inserted into a series effects loop or after a preamp section with the advantage of having the Decimator level detectors track the guitar signal directly. With the G String pedal you can set the threshold and no matter what level of noise the Decimator will track perfectly without any side effects.

The amazing thing is that you can switch from high gain to your clean channel and never have to switch the Decimator G String off due to the threshold being set too high. It’s simply transparent.

As can be seen in the diagram, the G String noise reduction pedal has an input to connect a guitar directly and a buffered output signal to feed the front of a guitar rig directly while providing a separate audio channel of Decimator that can be inserted in the signal chain of any guitar rig. You can insert any other pedals between the output of the Decimator G String and the input of your guitar amplifier. This allows the Decimator G String pedal to remove any level of noise you may have even with overdrive pedals at the front end of the amp. 

Input Impedance: 500K ohms - Maximum Input Level: +12dbu - Effective Noise Reduction: greater than 60db - Dynamic Range: greater than 100db - Total Harmonic Distortion: .05% typical - Power consumption: 35mA @9VDC - Release response: Program dependant based on Time Vector Processing.