|
| Service Center |
Specializing in Tube, solid state
amp repair & mods, rack effects, pedal repair and mods, mixing board refurbishing, PA system repair, Hi-FI
repair, guitar repair & mods.
Want your speaker to arrive already broken in? No problem, your speaker will be broken in using a frequency generator
in sweep mode to fully break in each area of the cone. All you need to do is choose the "Arrive broken in" option
on the drop down menu in the online store for which speaker you want. There is a small fee for this service. Also a Buzz Feiten Authorized retrofitter.
Your guitar is set up your guitar with a new tempered tuning that allows you to play in tune all over the neck without
pitch inconsistancies. We install a custom Buzz Feiten nut made out of bone; which brings the nut closer to the bridge. Then
intonate the bridge to the proper pitch settings and your set. Do you want the Suhr silent single coil back plate system, installed in your stratocaster? An
amazing new technology from John Suhr guitars that allows you to hear your single coil pickups with no 60 cycle hum!! (
note: this will not work on reverse wound pickups.) Interested in more info on the Suhr BPSSC system?
Want a more efficient amplifier with more punch while still retaining that tube rectifier feel? Then the FRED (Fast Recovery Epitaxial Diode) upgrade for any amp that has a solid state rectifier is a must
have.
Bullet proof your amp with the Bullet proof kit.
This protects your amps components.
No need in worring
if your speaker cable isn't plugged in before you turn it on.
and wiping out your transformer,
Your covered!!
Revive your amp with a Cap
Job. Electrolytics can dry out after
about 10 years.
By re-Capping your amp you will bring back
the Mojo in your tone. When forming the new capacitors we
bring
them up to voltage over a 24 hour period.
Here is an upgrade that is vital for your vintage gear. A 12' 16 gauge
three prong gounded AC power cord will
keep you safe and reach all the wall outlets. I admit to have been shocked more than a few times with vintage
PA's and
guitar amps.
Want to hot rod your amp?
Does it need just a bit
more gain? or alot? Tired of
changing out batteries on your distortion pedals?
Popular
mods include the Eric Clapton Slow hand mod for Stratocasters, This mod adds a +25
dB mid boost to your guitar.
Also another useful mod that customers
are getting is the Blender wiring for Statocater style guitars. This Lets you blend in the neck pickup in the bridge position as much as you want and you can blend in the bridge pickup in the neck position as
much as you want. This is a great way to smooth out the treble in the bridge position or add some bite in the neck position.
In positions 2 and 4 you have all three pickups on with hum cancelling. This is all achieved by installing a blender pot into
the 2cnd tone control and some internal rewiring. The 1st tone control becomes a master tone. When the blend knob is at 10
you have your stock Strat sound.It is easy to use and no holes are drilled into your guitar.
Mercury Magnetics transformers are ordered as needed.
If you would like to order a Mercury Magnetics for your amp it generally takes 2-3 weeks for delivery and a 50% non-refundable
down payment is required. The down payment goes towards the payment of the transformer when purchased. Your musical instrument is delicate and extra
precautions are taken to make sure it leaves the shop the way it arrived, with one exception, sounding better.
|
